Summer sewing for my girls

Once again this year I did just a little bit of quick and dirty sewing for the girls before our trip away.

For this dress for Sophia I just made up the pattern and guessed the dimensions (yeeha) and when I sewed it together it didn’t fit. So I had to add the orange twill panelling down either side so the child could actually breathe in it. Even though it was a beeyatch to sew in, I love the little detail of the twill and think it really lifts the end result.

The back is a bit of a dog’s breakfast.

I had to cut a “v” in the material there too so we could get it over Sophia’s head and the hastily constructed button and loop system looks cute but does not do the job. It gapes and falls open but, ya know, Sophia can’t see it so all’s well.

I found some gorgeous lilac linen for Olive and spent a lot more time than I would usually invest in making this little top for her.

I used this pattern which I really liked and will use again. I nearly had a nervous breakdown shirring the bloody thing though as my machine started playing up but once done I was pleased.

I also made a shirt for Sophia using the same pattern and some lovely, soft and light yellow fabric. She doesn’t think it’s much chop though. Too voluminous. I really should start measuring that child before I sew.

Finally, a couple of new backpacks complete with the fabric luggage tags I showed you a while back (tutorial for the luggage tags here).

I do love that the kids are still young enough to think the clothes I make them are awesomenosity on a stick.

I’ve threatened to make my husband some boxer shorts (I am outraged by how expensive such simple garments are) and I wonder how awesome he would find those. Especially if I choose some entirely inappropriate fabric.  I think it might be worth it just for the look on his face.

Advertisements

Fabric luggage tags: a tutorial : Part 2 in the paper punch-a-palooza series

We went away for our annual family holiday recently and, as is my wont, I decided to add to the general chaos of preparation by making a whole lot of stuff. Including some of these fabric luggage tags.

One of the things I love most about making stuff is that I can use fabric in patterns and colours that I really love. The fabric on the tag on the far right is my newest obsession. You’ll see a bit more of that in some upcoming posts.

Anyhoo, these luggage tags were v satisfying to make, relatively simple (other than some bruising on my hand from hard-core punching) and held up extremely well when I put them to the test.

What you need:

Large tag-shaped paper punch (or a cardboard luggage tag template and some sharp scissors)*

Fabric to create two luggage tag punchies – one for the back of the tag and one for, ummmm, the front.

PVA-type  clear-drying glue (not Mod Podge, though)

Printable fabric, or alternatively, fabric pens or stamps

Circular paper punch (diameter of roughly 6mm/0.25″)

Metal eyelets

* Look, I know this is a paper punch series and all but here’s the thing about this project – the paper punch isn’t absolutely essential to it which is why I’ve offered the template and sharp scissors alternative. So is this technically a punch-a-palooza-worthy project? Why yes my friends, because even if you cut your tag out, you still need a little circular punch to create the hole to thread your loop through. Known in professional punching circles as a double whammy, you don’t come across the old “punch within a punch” very often. In fact, they’re as rare as Kim Kardashian’s brain cells. So yep, practically endangered.

I’ve been toying with the idea of getting one of these monster-sized tag punches for aaaages and I’m so glad I finally bit the bullet.

They are great for turning out gift tags from any pretty paper or left over cards you have.

Aaaaaanyhoodles, let’s move right along get our punch on.

What to do:

1.  Cut rectangular pieces of  fabric a few centimetres larger than your luggage tag will be on all sides.

2.  Smear both sides of your fabric with PVA clear-dry craft glue or the like. DO NOT use Mod Podge as it doesn’t leave the fabric “crispy” enough. Allow to dry thoroughly, preferably overnight in a cool spot.

3.  Once your fabric has dried and crisped up sufficiently, slide it into your punch, take a deep breath (first ensuring your punch is on a solid, flat surface) and smack the bottom of your palm quite hard onto the punch lever. I am not going to kid you, this project is not for cravens.Yep, no pain no gain.

Well, some gain because, as I mentioned above, rather than potentially breaking all of the small bones in the bottom of your palm, you can simply trace a tag shape and cut it out.

And in any case, if you do go the paper punch route, hopefully you shouldn’t have to punch that hard to get a result. The thing to remember is we are not punching through paper here. But we want to get our fabric as close to that state as possible. So you’ll have more luck with finer, lighter fabrics rather than heavy quilting cottons. For example,  thick calico did not punch well. Finer calico would though I think.

Having said that, the tags in the photos with the grey and orange dots are heavy quilting cottons. So it can be done. If you don’t mind severe bruising of your palms.  I don’t. But then I’m pretty tough.

4.  Next, align your front and back luggage tag shapes and using sharp scissors, trim any bits you need to get them to match up as closely as possible.

5.  Now you need to create your address lables. I tried stamping straight onto a calico back:

And then when I was unhappy with my impatient, messy stamping (and that was before I digitally scribbled out personal details) I printed tiny lables using printable fabric that I just ran through my computer. I explain all about printable fabric in this post.

6.  If using a little lable, pin it in place and sew onto one of your tag shapes.  I used the cute stitch on my sewing machine that I refer to as “fake serger” to stop the edges fraying.

7.  Now pin your two tags together and pin to keep them aligned. Sew around the edges

8.  Use your circular paper punch to punch a hole in the top of the tag.

9.  Insert a metal eyelet and hammer into place.

Alternatively, just sew around the hole a few times to reinforce the area.

10.  Create the loop strap for your tag. I used some stretchy, durable ones I took off some airline issued tags. If your luggage is going in a luggage hold then you will need something stretchy and strong so that when other luggage moves on top of it, the tag stretches and holds rather than snapping.

For the tags I put on the kids backpacks, I just sewed ribbon together to create a loop.

Possible variations and uses:

  • houndstooth or plaid for the gents in your life (not sure whether that would punch well though – might be a cutting one).
  • make a set of these for a family heading off on a trip.
  • give them as favours at travel-themed events.
  • you could even, if you had too much time on your hands, use them as invitations for a party. Get the guests to bring their tags along with them and then sew their personal details over the top of the event details and post the tags back to them with your thank you notes.

Results of the road test.

Apart from the calico which frays at the drop of a hat, none of the other tags had the slightest signs of wear. The glue really kept them neat.

Here are the really brave pioneers after a total of 8 hours in the luggage hold of a 747 followed by rough treatment on the luggage carousel and 2 hours in a car boot. They held up beautifully.

Sniff. My tough, courageous little tags.

Bless their little hearts.